USB C 3.2 Enclosure for 12+16 PIN MacBook SSDs, PCle SSDs Enclosure Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro, 2014 Mac Mini
- ✅【Applicable SSD】- -USB 3.2 Type-C SSD enclosure is Compatible for original and INDMEM 12+16 PIN MacBook SSDs. NOT compatible with Toshiba 12+16PIN SSD.
- ✅【Outstanding Transmission】- -Type-C to c 10Gbps high-speed transmission with USB 3.2 Gen 1 interface,measured continuous reading and writing. Read speed up to 950MB/s, write speed up to 850MB/s,steady and efficient.
- ✅【Easy Setup 】- -Tool-free design allows quick and easy installation of your SSD Enclosure Adapter, support plug and play and hot-swap.Less than 3 minutes to install SSD and plug in.
- ✅【Support Operating System】- -USB C Enclosure SSDs Compatible for Mid 2013-2017 MacBook Air, Late 2013 – Mid 2015 MacBook Pro Retina, Late 2013-2017 iMac, 2013 Mac Pro, 2014 Mac Mini.
- ✅【Aluminum Alloy Shell】- – Adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, reduced power consumption.be portable and easy to carry.
ACASIS USB C 3.2 SSD Enclosure for Apple Flash SSDs 12+16 PIN MacBook Pro,MacBook Air, Mac Pro, iMac from 2013 to 2017 Portable Storage Enclosure Compatible with M.2 Nvme SSD with Adapter
- [Higher Compatibility] This USB C 3.2 SSD enclosure works well for Apple original Mac SSDs with 12+16 Pins. DOES NOT support Toshiba 12+16 PIN SSDs (*please make sure your SSD in Mac is not a Toshiba one before purchase). NOT compatible with all SATA SSDs, or third-party SSDs, including OWC SSDs. Support M.2 NVMe SSDs with an enclosure interface adapter.
- [Faster Data Transmission] 10Gbps transmission speed with USB 3.2 Gen2 interface. Save and transfer data in a seconds. It can also reach 20Gbps transmission speed with USB 3.2 Gen2x2 if the computer supports.
- [Friendly Design] ACASIS USB C 3.2 SSD enclosure is sturdy and portable, with aluminum alloy case for quicker heat dissipation. To prevent it from being disconnected from your Mac or PC, we advise you: ① put PCB back into the enclosure and tighten the screws to use (which will also help dissipate heat effectively); ② deselect “Put hard disks to sleep when possible” both in Battery and and Power Adapter.
- [System Requirements] ACASIS USB C 3.2 SSD enclosure supports Windows7/8/10/11,Mac OS 10.0,Linux 2.6 or later.Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro
- [Easy Installation] Just take out the PCB board from the enclosure,then fully insert SSD to card slot of the PCB board, we advise you put PCB back into the enclosure and tighten the screws to use. So it can get effective heat dissipation or it will disconnected in your Mac or PC. Plug and play, support hot plug.On Windows OS, hard disk will not available on “This PC”/ “My computer”, please find your drive from “Disk Management”.
USB C 3.2 Gen2 MacBook SSD Enclosure for Apple Flash SSDs 12+16 PIN MacBook Pro MacBook Air Mac Pro iMac from 2013 to 2017, with Adapter to Support M.2 NVMe SSDs (PCIe NVME/PCIe AHCI Protocol)
- [Upgraded MacBook SSD Enclosure] The USB C 3.2 SSD enclosure works well for all Apple original Mac SSDs with 12+16 Pins. Compatible with Toshiba and OWC brand SSDs. Also support M.2 NVMe SSDs with an enclosure interface adapter.
- [2022 Latest High Speed Chip] Support PCIe NVMe protocol / PCIe AHCI protocol SSD, better work efficiency and more secure data protection. USB 3.2 Gen 2 Macbook air ssd enclosure is compatible for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro. Compatible with Windows, Mac OS, Linux, iOS.
- [Faster Data Transmission] Macbook pro ssd enclosure with USB 3.2 Gen2 interface, the transmission speed is 10Gbps(USB-C to USB-A). It can also reach 20Gbps transmission speed with USB 3.2 Gen2x2.(USB-C to USB-C). Downward compatibility with USB 3.1 gen2, USB 3.0, USB 2.0. It only takes a few seconds to save and transfer files.
- [SSD Installation Steps] Unscrew the four fixing screws on the cover with a screwdriver and remove the cover from the ssd enclosure. Align the ssd with the card slot on the ssd base and gently push it in. Tighten the screws with a screwdriver to fix the ssd on the ssd base. Tighten the 4 fixing screws on the cover with a screwdriver, and the installation of the ssd is completed. ❤Note: if the M2 ssd is connected, first install the adapter and then insert the M2 ssd.
- [Aluminum Alloy Shell USB 3.2 Gen 2 m.2 S ESDnclosure] Adopts aluminum alloy shell, durable and excellent heat dissipation, reduced power consumption. You will get M.2 NVMe & Macbook USB3.2 Gen2 SSD enclosure x1, USB-C to USB-C Cable x1, USB-C to USB-A Cable x1, SSD Fixing Screw x1, SSD Enclosure Fixing Screw x1, Bolt Driver x1, M.2 Adapter Plate x1.
ACASIS USB C 3.2 SSD Enclosure for Apple Flash SSDs 12+16 PIN USB C Hub Adapter for MacBook Pro 13″-16″ 2021-2016, MacBook Air 2021-2018 with 100W Power Delivery Port 40Gbps Data Port 3*USB 3.2 10Gbps
- This USB C 3.2 SSD enclosure support for apple Mac SSD with 12+16PIN which was original factory-installed. NOT SUPPORT Toshiba 12+16PIN SSD and all SATA SSD. Support M.2 Nvme SSD after installing the enclosed interface adapter.
- 10Gbps transmission speed with USB 3.2 Gen2 interface. Save and transfer data in a seconds. It can also reach 20Gbps transmission speed with USB 3.2 Gen2x2 if the computer supports.
- Design] Aluminum alloy case for quicker heat dissipation. ACASIS USB C 3.2 SSD enclosure is sturdy and portable.
- Support Thunderbolt 3 throughput (up to 10 Gbps),5k or 4k 3840 x 2160@60hz video and 100W Power Delivery (PD) fast charging for your MacBook Pro 2016-2021 MacBook Air 2018-2021 while connecting to a USB-C power adapter.
- Enable you to connect up to three USB peripherals such as hard drive, printer, mouse to your MacBook Pro or MacBook Air simultaneously and transfer data at up to 10Gbps. Backwards compatible with USB 2.0 devices.(Note: This adapter won’t support Apple USB Super Drive)
MAIWO USB 3.2 Gen2x2 Type C External Hard Drive Enclosure for 12+16 PIN MacBook AHCI SSDs with Aluminum Alloy Case, Transmisson max 20Gbps
- External Hard Drive Enclosure for AHCI SSD: This portable USB 3.2 Type-C SSD enclosure is compatible with original 12+16 PIN MacBook SSDs
- Superspeed Transmission: USB3.2 Gen2x2 interface, transfer rate can reach 20Gbps, transfer data in a second.
- Excellet Heat Dissipation: the case is made of aluminum alloy with CNC progress, very durable and compact, come with a silicone pad for quicker heat dissipating, protect the hard dist very well.
- Easy Installation: Equiped with screw and screwdriver. Just take out the PCB board from the enclosure,then insert SSD to card slot and fix the cover with screw.
- System Requirements: Support Windows XP/7/8/10/11, Linux and Mac OS.Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro.
GODSHARK PCIe SSD Enclosure for 2010 2011 MacBook Air, USB 3.0 External Reader for A1369 A1370 SSD Adapter with Case, Support Model MC503 MC504 MC965 MC966 MC505 MC506 MC968 MC969
- This PCIe SSD enclosure is a DIY kit for assembling a portable SSD with A1369/A1370 SSD 2010/2011 (6+12 pin).
- USB 3.0 high speed transfer or retrieve data from 2010/2011 MacBook Air SSD (6+12 pin).
- The enclosure was made of aluminum material, so the cooling function is much better, can realize the SSD’s potential of its full performance.
- DO NOT fit for 2012 MacBook Air or Pro SSD (7+17 pin) and 2013 2014 2015 2016 MacBook Air or Pro Retina SSD (12+16 pin).
- If your SSD is MAC OS formatted, it isn’t compatible with Windows OS, so a new SSD without partition. It can’t be shown in “My Computer”. Please delete the old partition and create a new partition in “Disk Manager” in Windows.
CR1216 3V Watch Lithium Battery(10-Pack)
- New set of 10-pack Watch Lithium Battery; CR1216 cell size
- Replacement for DL1216,BR1216,KL1216,5034LC,L1216,ECR1216, GPCR1216,5034LC,E-CR1216,KECR1216
- Brand new&guaranteed factory fresh, trusted power for proven performance and reliability
- Voltage :3.0v , Capacity :25mAH,Dimensions:Φ12.5X1.6mm，Package:10psc（2 card）
- Warm Tips: Battery should be kept out of the reach of children
SABRENT USB 3.2 Type-C Tool-Free Enclosure for M.2 PCIe NVMe and SATA SSDs (EC-SNVE)
- CONVENIENCE: 100% Tool-Free, quickly install and remove SSDs without any tools.
- DESIGN: Ultra-slim Aluminum case with ABS frame. Sleek, Durable, and Convenient. Portable yet durable, ideal for traveling.
- COMPATIBILITY: M.2 form factor compatible with both SATA and NVME in sizes: 2242/2260/2280.Thunderbolt 3 compatible
- SPEED: USB 3.2 supports data transmission speeds of up to 10Gbps for steady and efficient data transfer. Backward compatible with USB 3.1 and USB 3.0 at respective speed limits.
- PLUG & PLAY: No additional drivers required. Bus powered. Does not need an external power supply. Perfect for tech nerds, 4K content designers, and engineers. At up to 1000MB/s, Data copy and transferring will be done in in no time.
SABRENT 2.5-Inch SATA to USB 3.0 Tool-Free External Hard Drive Enclosure [Optimized for SSD, Support UASP SATA III] Black (EC-UASP)
- Tool free design, easy to install,Transfer Rates Up to 480 Mbps when connected to a USB 2.0 port,Transfer Rates Up to 5 Gbps when connected to a USB 3.0 port.
- Suitable for 2.5” SATA/SSD; Supports Standard Notebook 2.5″ SATA and SATA II Hard drives
- Optimized for SSD, Supports UASP SATA III,Backwards-Compatible with USB 2.0 or 1.1
- Hot-swappable, plug and play, no drivers needed
- Operating System: Supported Operating Systems: Mac,Windows;Supported Windows Versions: Windows 7, Windows 8, Windows Vista, Windows XP; Supported Mac Versions: Mac OS X and Higher
As an Amazon Associate I earn from qualifying purchases.