[Upgraded] 30A Solar Charge Controller, Black Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display (30a)
- UPGRADED SOLAR PANEL CONTROLLER: Compatible with 12V 24V system.This solar charge controller helps you manage the working of solar panels and battery in solar systems automatically with the build-in industrial microcontroller. You don’t need to reset it when the battery runs out cause it will memorize various parameters set by the user. You can also charge your mobile phone, tablet, PCs through Dual USB output 5V/2.5A (max).
- SAFE TO USE: Equipped with overcurrent protection, short-circuit protection, inverse connection protection, low voltage, and overcharge protection, and have fully 3-stage PWM charge management. This 30A solar charge controller will help you improve the system efficiency safely and prolong the life span of the battery.
- PLEASE NOTE: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL. Do not support any other batteries. The solar controller will turn off automatically to protect the lifespan of your battery if the voltage of the battery drop below 8V.
- LCD DISPLAY: Let you know the status and data with LCD Display. You can also switch modes and parameter configuration conveniently and can use this controller in a different place like home, industrial, commercial, etc.
- WARRANTY: 12-month warranty and lifetime technique support. If there is any problem, please contact us through amazon email, we will arrange a refund or a replacement.
Renogy 10 Amp 12V/24V PWM Negative Ground Solar Charge Controller Compact Design w/LCD Display for AGM, Gel, Flooded and Lithium Battery, Wanderer 10A
- 【12V/24V Automatically Detect】Automatically detects 12V or 24V DC system voltages (for non-lithium batteries only), and the LCD screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes
- 【Smart 4-Stage PWM Charging】Smart 4-Stage PWM charging (Bulk, Boost, Float, and Equalization) increases battery life and improves system performance. Intelligent protection against reverse polarity, overcharging, short-circuit, and reverse current.
- 【Compact in size】Which makes it easy to install virtually anywhere.
- 【Multiple battery adaptation】 Deep Cycle Sealed (AGM), Gel, Flooded and Lithium battery option ready.
- 【Wanderer10A|30A Installation Notes】 The default starting position of the Wanderer controller terminal hatches are closed (in the UP position) that could mistakenly look like an open wire hatch. Make sure to FIRST lower each terminal hatch by screwing the terminals counterclockwise (CCW) to expose the wire terminal hatch to the open position. THEN secure each cable by rotating the screws clockwise (CW) to the closed position.
SOLPERK 10A Solar Charge Controller Waterproof Solar Panel Controller 12V/24V PWM Solar Panel Battery Intelligent Regulator for RV Boat car ，with LED Display
- ✔️【Waterproof Solar Charge Controller】IP67 waterproof, suitable for outdoor use. Automatically identify voltage, 12V Max power: 150W, 24V Max power: 300W. The maximum current is 10A. Compatible with various 12V/24V deep-cycle batteries, such as AGM, GEL, Flooded. Adopting brand MCU chips to realize fast intelligent control and ultra-low standby power consumption.
- ✔️【Intelligent protection】Intelligent 3-stage PMW charging improves charging efficiency. The solar controller not only extends battery life and improves system performance, but also has multiple protection functions: Battery under-voltage, over-voltage, output overload, short circuit, battery, solar panel anti-back connect protection.
- ✔️【Indicator Monitoring】You can understand its current working status through the three indicators on the solar panel charge controller. Load normal output: green light is always on; battery is normal: green light is always on; solar panel is charging normally: red light is always on.
- ✔️【Easy to install and operate】The solar panel controller adopts SAE port, plug and play. A manual with clear connection steps is included. There are 2 pre-drilled holes on the controller, you can install it anywhere according to your needs!
- ✔️【What You Get】1 solar charger controller, 1 manual. Extended 12 months warranty and our 7*24h technical service support. If you have any questions, please contact us directly.
POWOXI Solar Panels Charge Controller, 8A Battery Regulator for 12V Solar Battery Charger, Solar Battery Maintainer and 12 Volt Batteries Power Kit
- 【 APPLY TO 12V SOLAR PANELS】:The 8A solar controller is used only for 12V solar panels and 12V batteries. The solar panels can convert light energy into electric energy stored in batteries which will be protected by the solar controller.
- 【THE MAXIMUM INPUT OF SOLAR ENERGY IS 130W】:The maximum power of solar panels is130W, the maximum voltage 22V, and the maximum current 8A. It is suitable for 12V rechargeable batteries. In order to lengthen its service life, please do not overload.
- 【EASY TO MONITOR THE LED INDICATOR LIGHTS】: The solar controller integrates two LED lights, both green and red indicator lights on (fully charged) and only the red one (charging). The product also provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection.
- 【HOW TO CONNECT】: Before connecting, please identify the correctness of positive and negative polarity, our controller red is positive, black is negative, please connect positive to positive, negative to negative, we have attached polarity converter, if the product does not work, please contact the after-sales email, we will reply you in time.
- 【MULTI-PROTECTION 】:The product provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection. 【The controller needs to be connected to a battery to work. 】【Advantage 1: 】 It will turn off automatically at night, and won’t consume battery power. 【Advantage 2: 】If there is connection errors，it will not be damaged.
EEEKit MPPT 100A Solar Charge Controller, Upgraded Solar Panel 12V 24V Dual USB Intelligent Regulator, Adjustable Parameter Backlight LCD Display and Timer Setting, Multi-Function Protection
- DUAL USB 100A MPPT SOLAR CHARGE CONTROLLER: Using innovative MPPT technology high tracking efficiency up to 99%; Please refer to the information if you are not familiar with Mppt technology: There are many kinds of MPPT technology, Our Solar Controller Mppt technology is to detect the maximum charging current, not the boost type or the automatic charging of the solar panel voltage.
- MULTIPLE INTELLIGENT PROTECTION: Solar controller has short-circuit protection, open-circuit protection,reverse protection, over-load protection. Fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
- MULTI-FUNCTION LCD DISPLAYS: This controller is 12V/24V automatically adapt,first connect the battery,then connect the solar panels,when you first use it, make sure the battery has enough voltage,so that the controller can recognize the correct battery type.
- BUILD-IN INDUSTRIAL MICRO CONTROLLER: 16AD sampling accuracy, temperature Charging current, discharge current accurate real-time display, power generation at a glance. automatically manage the working of solar panel and battery in solar system to support charging.
- EASY TO INSTALL AND OPERATE: The charge controller should connect the battery first, then the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order.Dual mosfet Reverse current protection, low heat production. Charge controller not to connect the grounded to make the light run. It Can charge the battery and supply power to the load at the same time. We offer a 30-days money-back guarantee and 12-month warranty for quality-related issues.
Thlevel 30A Solar Charge Controller, 12V/24V PWM Solar Panel Charge Controller Intelligent Regulator with Adjustable Parameter LCD Display, Dual USB Port and Setting of Light Control Delay Mode
- 【Upgraded solar panel controller】 Charge controller build-in industrial micro controller for automatical management, memorizing various parameters set by the user and the data won’t be lost when the battery runs out. Compatible with 12V/24V system.
- 【Scope of application】 The 12v charge controller solar is only suitable for lead-acid batteries: OPEN, AGM, GEL. Do not support any other batteries. Dual USB output, the maximum current of 2A, to support mobile phone charging.
- 【Safe to use】Charge controllers for solar panels with Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection. 12v solar charge controller takes fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery.
- 【LCD display】Solar controller 12v with big LCD display, you can also switch modes and adjustable parameter, clearly indicate the status, suitable for home, industrial, commercial etc.
- 【Notice】 The 12 volt charge controller should connect the battery first, then the solar panel, and finally the load! Please strictly follow the above order to access, otherwise it may damage the controller or other components; the disassembly sequence is contrary to the wiring order.
DOKIO 110w 18v Portable Foldable Solar Panel Kit (21x28inch, 5.9lb) Solar Charger With Controller 2 Usb Output To Charge 12v Batteries/Power Station (AGM, Lifepo4) Rv Camping Trailer Emergency Power
- 【LIGHTWEIGHT AND ULTRA-THIN FOR EASIER MOVING】– This solar panel packs 110W of power yet is only 0.5inch (1.2cm) thick and weighs only 6lb (2.7kg),Foldable Dimension:21*20*1inch (54*50*2.4cm), making it easier to transport, hang, and remove.
- 【PERFECT CHOICE FOR OUTDOOR AND EMERGENCY LIFE】– 9.85ft (3m) cable length from panel to controller, For most power stations (Jackery,Goal Zero,Ecoflow,Paxcess) and 12-volt batteries(AGM,LiFePo4,Deep cycle batteries),RV,car,boat,trailer,truck,pumpa,camping,van,emergency power
- 【COMPLETE KIT，WORKS OUT OF THE BOX 】– Smart PWM charging Intelligent protection against reverse polarity, overcharging, short-circuit, and reverse current.Integrated 5V 2A USB ports to charge phones USB devices.If you use the built-in MPPT Power Station, you don’t need to connect the attached PWM controller.
- 【AFFORDABLE AND HIGH CONVERSION EFFICIENCY】– With high efficiency monocrystalline solar cell, you will get greater power efficiency even though the panel is smaller than a traditional model.Maximizes system output by reducing mismatch loss.
- 【QUICK DELIVERY+WARRANTY】– Amazon US warehouse shipping, Receive goods in time，All DOKIO products come with a 30-day money back Guarantee, 1-year warranty and forever support from DOKIO customer care.
Renogy Voyager 20A 12V/24V PWM Waterproof Solar Charge Controller w/ LCD Display for AGM, Gel, Flooded and Lithium Battery, Used in RVs, Trailers, Boats, Yachts, Voyager 20A
- 4-STAGE PWM Technology: The Voyager controller is equipped with advanced smart PWM technology with high charging efficiency. It provides 4-stage charging (Bulk, Absorption, Float and Equalization) in order to protect the battery.
- IP67 Rated Waterproof: With an IP67 rated waterproof design, the Voyager controller is suitable for outdoor use and will remain fully operational when exposed to water spray, rain, or condensation.
- Multiple Protections: The Voyager controller has multiple intelligent protections against reverse polarity, over charge, short-circuit, reverse current, overload, and over discharge, keeping your battery fully protected.
- Support Multiple Battery Types: The Voyager controller can automatically sense 12V or 24V system voltage when paired with a Gel, AGM, or Flooded batteries. It also comes with a Lithium activation feature.
- Backlit LCD displaying system: The Voyager comes with an LCD display showing accurate and timely information including charging current, generated energy, temperature, battery voltage, and error codes that allows users to monitor and control charging.
ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V
- ►Rated Discharge Current: 20A; USB Output Voltage: 5V/3A; Battery Voltage: 12V/24V auto. Adjustable power rate with dual USB ports; 3-Stage(Bulk, ABS, Float) charge management and 4-Stage PWM charge. Please notice the controller might be power off if the battery voltage is too low.
- ►Functionality: Equipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management
- ►Mutiple Electric Protection: Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection
- ►Good Heat Dissipation: Dual mosfet reverse current protection, low heat production(ALL electronic components generate heat when they are running,it is better to shelter them for better heat dissipation, avoid direct sunlight exposure or damp place)
- ►Easy to Use: Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc.
GHB 20A 12V 24V Solar Charge Controller Auto Switch LCD Solar Panel Battery Regulator Charge Controller Overload Protection Temperature Compensation
- LCD Screen Display: This solar panel charger controller with LCD digital screen which is with energy-saving backlight to display all parameters, display better, more clea and more power-efficient
- Fully Automatic: This solar panel regulator with output switch, easy to operate. The battery indicator light on the controller will be on if successfully connected
- Power-efficient: Microcontroller digital accuracy, when solar panel regulator is charging, the arrow between the panel icon and the battery icon will flash fastly, when the battery was a full charge, it will be slow flashed, will stop charging. The function of the solar charge controller is to protect the voltage overshoot and discharge. Available for DC lamp and phone charging (Please correctly connect the positive and negative terminals, makes sure all terminals are connected tightly.)
- Rated Discharge Current : 20A; USB Output Voltage: 5V; USB Output Current: 1.5A; DC Output Voltage: 12V-24V, DC Output Current: 20A. To connect your load and the cables with the right polarity and then connect with the load output port of the controller. Pay special attention to + – polarity to avoid reversed connection
- Protection Functions: Overload and Short circuit protection, Lightning protection, Under-voltage protection, Over-charging protection, Reverse Polarity protection. Use PWM and WPC mode, improve system efficiency and prolong the life span of the battery
As an Amazon Associate I earn from qualifying purchases.