FRICTIONWORKS Made in USA 4″ Premium Vise Jaw Pads for bench vise. N48 Grade Magnets. SH 60 Medium Firm Multi-Use Non-Scratch Polymer

FRICTIONWORKS Made in USA 4" Premium Vise Jaw Pads for bench vise. N48 Grade Magnets. SH 60 Medium Firm Multi-Use Non-Scratch Polymer

    Features:

  • MADE IN USA – The vise jaw redesigned from the ground up and built to a higher standard in the USA. Tight tolerances. Magnets stay in the jaws. Jaws stay on the vise. No slipping, no falling, no falling apart
  • HOLDS FIRMLY TO THE VISE: 8 N48 spec rare earth magnets – 7 lbs of force each. The only jaws with listed specs and the magnet strength you need to keep the jaws solidly on the vise
  • UNIQUE MAGNET RETENTION SYSTEM – Magnets secured with stainless nuts and screws to a proprietary internal bracket overmolded into the jaws, solving what is likely the biggest failure point of all bench vise soft jaws
  • ENHANCED MATERIAL – Our proprietary reinforced polymer composite, shore hardness 60-D, with textured face Is incredibly tough yet softer and grippier than nylon while maintaining more rigidity and toughness than TPU
  • THICKER WALLS – with our custom polyurethane provide more uniform compression than other materials reducing slippage, vise slop and racking
  • PROTECTIVE SURFACE – Specially textured surface won’t mar, scratch or discolor. Tested on cerakote, chrome, aluminum, wood, plastic, painted surfaces, and more
  • TIGHT TOLERANCES – true flat surfaces, angles, and dimensions reduces wobble and improves fit and hold. Outside edge of magnets is 3″ apart so fits 3″ vises and up
  • BROAD USAGE SPECTRUM – Our medium firm material provides superior hold and compression across a wide range of torque/clamping pressure. Reversible for flat and round/irregular shaped work pieces. Great for low to mid-high torque applications
  • LIMITED LIFETIME GUARANTEE – We stand behind our products and our customers 100%
  • TOOLS, not toys. Designed and built in the USA by Frictionworks. We take polymer seriously…seriously

Heat Wave Visual MADE IN THE USA Vise Sunglasses in Black Lens

Heat Wave Visual MADE IN THE USA Vise Sunglasses in Black Lens

    Features:

  • Made from TR-90 High End Thermoplastic
  • Custom Gold 5 barrel hinge construction
  • Meets ANSI Z87 Requirements
  • Shatter resistant 2mm polycarbonate lenses
  • UVA/UVB 400 protection

Dubuque Clamp Works Made in USA Wood Hand Screw Clamp 8 inch Hard Maple jaw

Dubuque Clamp Works Made in USA Wood Hand Screw Clamp 8 inch Hard Maple jaw

    Features:

  • Last woodworking clamp still made in the USA – superior quality; world competitive price
  • The Dubuque Handscrew is one of the most Versatile clamps you can use
  • The Jaws are made with fine quality American hard maple.
  • Other sizes available from 4 to 14 inches!
  • Jaw length: 8 inches. Clamp opening: 5 inch. Jaw depth 4 inches

Dubuque Clamp Works Made in USA Wood Hand Screw Clamp 5 inch Hard Maple jaw

Dubuque Clamp Works Made in USA Wood Hand Screw Clamp 5 inch Hard Maple jaw

    Features:

  • Last woodworking clamp still made in the USA – superior quality; world competitive price
  • The Dubuque Handscrew is one of the most Versatile clamps you can use
  • The Jaws are made with fine quality American hard maple.
  • Other sizes available from 4 to 14 inches!
  • Jaw length: 5 inches. Clamp opening: 2.75 inch. Jaw depth 2.5 inches

Made in USA The Original 11SP Vise Grip Locking Clamp with Swivel Pads, 2-Pack

Made in USA The Original 11SP Vise Grip Locking Clamp with Swivel Pads, 2-Pack

    Features:

  • Locking Clamp with Swivel Pads.

Riverruns Fly Tying Vise Racks & Dave Brandt’s Tied and True Hackle Gauge Made in USA Scientific Fly Size Judgement

Riverruns Fly Tying Vise Racks & Dave Brandt

    Features:

  • Aventik Fly Tying Vise Racks in two popular colors, Grey and Black. Made of Styrofoam 15PA, high density with hook rust inhibition, 16 slits each for holding hooks and flies securely.
  • Size 2.5 Inch 6.5 cm dia, can slide over and fix on any vise stem. A stainless steel spring included for adding on the vise for holding any fly tying thread or feathers.
  • Dave Brandt’s Tied and True Hackle Gauge, Made In USA. Is that really a size 18 dry fly you’re tying on? Whether you’re at your tying bench determining proper hook/hackle size, checking hackle size in a fly shop, or verifying the hackle of a fly in your box to match the hatch.
  • This gauge tells you hackle size-to-shank length/hook gape accurately after the fly has been tied. Simply grasp the hook bend and pass the hackled portion back and forth through appropriate openings until finding the size that just barely touches or clears the very tips of the hackle collar.
  • Never again fish a fly with an oversized hackle. Total length is 3.39inch / 8.6cm, width 2.13inch / 5.4cm. Product info service hot line +1 626 554 4053, west coast time 8:00 AM to 8:00 PM, 7 days per week.

Yost Vises 5″ Heavy-Duty Bench Vise, Double Swivel Rotating Vise: Head Rotates 360° Vertically, Body Rotates 360° Horizontally In The Locking Swivel Base, (Model 750-E; 1-Pack)

Yost Vises 5" Heavy-Duty Bench Vise, Double Swivel Rotating Vise: Head Rotates 360° Vertically, Body Rotates 360° Horizontally In The Locking Swivel Base, (Model 750-E; 1-Pack)

    Features:

  • Casting Clamp force: 7,000 lbs. and Torque rating: 165 Ft-Lb
  • Durable Rotating head constructed in 60,000 PSI ductile iron, stationary body cast in 30,000 PSI cast (grey) iron
  • Jaw Width: 5″ (12.7CM) x Jaw Opening: 4-7/8″ (12.4CM) x Throat Depth: 3″ (7.6CM) x Pipe Capacity: 0.5″D x 2.5″D (1.3 x 6.4CM)
  • 360 degrees Rotating Head For Clamping Material At Any Angle
  • Large 3.2″ x 2.5” (8.1CM x 6.3CM) anvil work surface for flat shaping
  • 360-degree locking swivel base with (2) lock downs adjusts the direction of the jaws for proper placement
  • Machined Q235 steel main screw 0. 74″D with rolled single acme threads at 4 threads per inch
  • Three (3) different sets of jaws for gripping parts: Machinist Jaws, Pipe Jaws and V-Jaws.
  • 0.5″D x 7. 48″ Long handle
  • Base mounting tabs: (4) x 0.5″D, mounting hardware not included.

Wilton 11106 Bench Vise, 6″ Jaw Width, 6″ Jaw Opening

Wilton 11106 Bench Vise, 6" Jaw Width, 6" Jaw Opening

    Features:

  • DURABILITY: Have castings with a 30,000 PSI gray cast iron body built for rugged use and extended life
  • 120-DEGREE SWIVEL: Has a double lock down swivel base
  • PERFORMANCE: Has grooved steel jaw inserts and large anvil work surface
  • LIFETIME WARRANTY: Product is built to last. Wilton warrants every product they sell against manufacturers’ defects
  • IDEAL FOR: General purpose, home shop, weekend projects, and light duty use

As an Amazon Associate I earn from qualifying purchases.

Random products:

yzj
njnj