5pack 9v Battery Clip with 2.1mm X 5.5mm Male DC Plug for Arduino by Corpco

5pack 9v Battery Clip with 2.1mm X 5.5mm Male DC Plug for Arduino by Corpco

    Features:

  • Plug Type: 2.1mm x 5.5mm Male to 9V Battery Clip
  • Cable length:6 inches
  • Great to use for LED strip light or arduino
  • Package contains 5 pcs 9v Battery Clips (9V battery is not included)
  • Arduino and Battery shown for example only

Gonioa 10 Pcs 9v Battery Clip, 9V Battery Power Cable Plug Clip 2.1 X 5.5mm Male DC Plug for Arduino

Gonioa 10 Pcs 9v Battery Clip, 9V Battery Power Cable Plug Clip 2.1 X 5.5mm Male DC Plug for Arduino

    Features:

  • New brand high quanlity
  • Material: Plastic
  • Size: 18.5cm
  • Package Included: 10*Battery Clip
  • Plug Type: 2.1 x 5.5mm Male to 9V Battery Clip

Gikfun 9v Battery Holder with ON/Off Switch for Arduino (Pack of 2PCS) EK2107x2

Gikfun 9v Battery Holder with ON/Off Switch for Arduino (Pack of 2PCS) EK2107x2

    Features:

  • 9v Battery Holder with ON/OFF Switch 9 Volt Box Pack Power Toggle for Arduino
  • It is ideal for all types of DIY projects, Raspberry Pi, Automobile, Camera and outdoor Camping DIY installations.
  • Easy to remove sliding cover.
  • The Cable with 2.1×5.5mm DC Power Plug.
  • Pack of 2PCS

9v Battery Clip with 5.5mm/2.1mm Plug, 10PCS 9v Battery Adapter for Arduino T Type

9v Battery Clip with 5.5mm/2.1mm Plug, 10PCS 9v Battery Adapter for Arduino T Type

    Features:

  • T Type, 2.1 x 5.5mm male plug to 9V battery clip
  • Can be used for arduino or LED strip light.
  • Standard 5.5×2.1mm DC Male Plug, conveniently connect to other power module or Arduino board.
  • Come with 10PCS, which can save you much and makes you always have a backup.
  • We offer worry-free warranty and friendly customer service within 12 months for your confident purchase. If you are not satisfied with any product, please don’t hesitate to contact us, we will serve you our best.

Chanzon 9v Battery Clip Connector Holder T-Type Holder with Leather Housing and Lead Wire Pack of 20pcs kit for Arduino LED Strip

Chanzon 9v Battery Clip Connector Holder T-Type Holder with Leather Housing and Lead Wire Pack of 20pcs kit for Arduino LED Strip

    Features:

  • 【Premium Quality】Pure Copper Wire: 24awg UL Pigtail Cables,Type: T-Fonts Terminal with Plastic Housing Cover,Super Tight Snap Head
  • 【Parameters】:20 pcs 2 pig tail( Black Red Wire ),Cable Length: 5.9 inches( 15cm dual leads series ),Buckle Size: 30 x 15 x 6mm / 1.18″ x 0.59″ x 0.24″ (L*W*H) small portable
  • 【Used for】 Arduino Project,Breadboard Design,Adapter Replacement,Repair,Led light and Application uses 9 Volt Power Battery and wires,Guitar Pedal
  • 【Warm Notice】 Only suitable for DC 1 x 9 V Vdc Batteries,Do Not use Electric Electronic Component in wet/damp Enviroment
  • 【Worry Free】Easy to connection and solder,Tinned Copper wiring Button Plug,Standard “+” “-” Pole for 9 Volts Battery,Socket Buckles Wired with Cable

Tegg 2PCS 9V Battery Holder with ON/Off Switch and 5.5 x 2.1mm DC Plug Lead Wire for Arduino

Tegg 2PCS 9V Battery Holder with ON/Off Switch and 5.5 x 2.1mm DC Plug Lead Wire for Arduino

    Features:

  • Battery holder with ON/Off switch and cover.
  • DC connectors are easier to connect.
  • Lead length: 15cm / 5.9Inches.Package Include: 2PCS.
  • With spring clip design, easy to install and remove a battery.
  • Great for use in electronics applications and small hobby projects.

Chanzon 9v Battery Clip with 2.1×5.5mm Male DC Connector T-Type with Leather Housing and Lead Wire Pack of 5pcs kit for Arduino LED Strip

Chanzon 9v Battery Clip with 2.1x5.5mm Male DC Connector T-Type with Leather Housing and Lead Wire Pack of 5pcs kit for Arduino LED Strip

    Features:

  • 【Premium Quality】Pure Copper Cord: 24awg UL Pigtail Cables(black),Holder Type: I-type Terminal with Leather Shell,Super Tight Snap Head
  • 【Parameters】:5 pcs 2.1×5.5mm DC Male Barrel Jack,DC Polarity: Center Positive,Cable Length: 5.9 inches( 15cm dual leads series ),Buckle Size: 30 x 15 x 6mm / 1.18″ x 0.59″ x 0.24″ (L*W*H) small portable
  • 【Used for】 Power Supply for CCTV Security Camera,Arduino Project,Breadboard Design,5.5 x 2.1 mm Port,Adapter Replacement,Repair,Led light and Application uses 9 Volt Power Battery and pig tail wires,Guitar Pedal
  • 【Warm Notice】 Only suitable for DC 1 x 9 V Vdc Batteries,Do Not use Electric Electronic Component in wet/damp Enviroment
  • 【Worry Free】5 Pack,Easy to connection,Copper wiring Button Plug,Standard “+” “-” Pole for 9 Volts Battery,Hard Housing/Cover Socket Buckles Wired with Cable

2Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 Power Module 6F22 6LR61 mn1604 pp3 Baterries

2Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 Power Module 6F22 6LR61 mn1604 pp3 Baterries

    Features:

  • Standard 5.5×2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch).
  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery.
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing; With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don’t always have to take apart/open some test equipment just to change the battery inside.
  • Not fit for Arduino Nano, Effect pedals.
  • Any quality issues, please feel free to contact us.

VAPKER 2.1×5.5mm Male DC Power Plug to 9V Battery Button Connector Cable Clips(10 Pieces Packed)

VAPKER 2.1x5.5mm Male DC Power Plug to 9V Battery Button Connector Cable Clips(10 Pieces Packed)

    Features:

  • Plug Type: 2.1 x 5.5mm Male to 9V Battery Clip
  • Material(External) : Plastic;Color : Black, Red
  • Great to use for LED strip light or arduino
  • Package contains 10 pcs 9v Battery Clips (9V battery is not included)

AKOAK 10 Pcs I Type 2.1 x 5.5 mm Male DC Power Plug For 9V Battery Button Connector Battery Holder

AKOAK 10 Pcs I Type 2.1 x 5.5 mm Male DC Power Plug For 9V Battery Button Connector Battery Holder

    Features:

  • Plug Type: 2.1 x 5.5mm Male to 9V Battery Clip.
  • Material(External):Faux Leather+Plastic.
  • Total length:(Approx) 140mm.
  • Style:I Type;Quantity:10pc.
  • Great to use for LED strip light or arduino.

As an Amazon Associate I earn from qualifying purchases.

Random products:

kkstar
eufy security camera